AVK PN16 Resilient Seat Check Valve Series 41/80 Description: Resilient seated swing check valve AS 4794 Flange and drilling to AS 4087 Figure B5 (AS 2129 Table D and raised face) or AS 2129 Table E and raised face Use: • For potable water and sewage applications • Valve designed for use up to 60C • Where applicable; for AS 4020 compliance, max temp = 40C
Resilient Seat Gate Valves
AVK PN25 resilient seat gate valve series 57-80. Features: Stem sealing exchangeable under pressure Face to face dimension to AS 2638.2 Flange to AS 4331 (PN25), drilled to AS 4087 B6 / AS 2129 Table F Use: • For water, sewage and neutral liquid applications • Valve designed for use up to 70C • Where applicable; for AS 4020 compliance, max temp = 40C
Orbinox HG Rubber Sleeve Knifegate Valve
The Orbinox HG model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries such as; Mining Power Plants Chemical Plants Wastewater Treatment
Orbinox Model TL Through Conduit Knife Gate Valve
ORBINOX O-PORT KNIFE GATE VALVE TL model Variants: TL – DN50-100, PN2-10, Stainless Steel body, 316 Stainless Steel gate and metal seat. Optional extras include flush ports, square port, special alloys, diamond port for control and bonneted design.
Orbinox Model HG Rubber Sleeve Knifegate Valve
ORBINOX SLURRY BI-DIRECTIONAL KNIFE GATE VALVE HG model Variants: HG – DN80-600, PN20, heavy duty slurry, metal reinforced, rubber sleeves and lock outs. Various gate materials available. Optional extras include bottom splash guards and flush ports. All types of operations available upon request.
Orbinox Model WG Rubber Sleeve Knife Gate Valve
ORBINOX SLURRY BI-DIRECTIONAL KNIFE GATE VALVE WG model Variants: WG – DN50-900, up to PN10, fully flanged and two metal reinforced rubber sleeves. Larger diameters with high pressures available.
InterApp Worm Gearbox
Variants: N/A – Quarter turn worm gearboxes for butterfly valves, ball valves and plug valves. Various sizes, materials, coatings, rations and IP ratings. Optional extras include lock out, electronic indication and ISO input flange.
InterApp Disc Materials For Butterfly Valves
Variants: N/A – ANSI 316 alloy 926 super austenitic, super duplex, hastelloy, alu bronze. Disc coatings include, rilsan, polyurethane, epoxy, halar, rilsan polyamide 11 and chromed.
InterApp Desponia Plus Butterfly Valve
Centric butterfly valve with elastomer liner for heavy duty applications. Variants: N/A – Wafer type from DN25-600 and lugged type from DN50-400. 316 Stainless Steel disc and replaceable liner. Various seat and disc materials available. Optional extras include Stainless body, PN20 rating and high temperatures.
InterApp Desponia U-Section D4 Butterfly Valve
Variants: Body style D4 (U-Section) Size range DN150 – 1600 Body material Cast iron and Ductile iron PN16, 316 Stainless steel, Ductile iron, Aluminium bronze disc and replaceable liner. Various seat and disc materials available including PN20 rating and lugged or through holes.
InterApp Desponia Lugged Butterfly Valve
Variants: Body style – D3 Lugged Size range – DN25-1600 Maximum working pressure – 16 bar / 20 bar (under request) Materials of Construction Body – Cast Iron, Ductile Iron & Carbon Steel Disc – Ductile Iron, Carbon Steel, 316 Stainless Steel, Super austenitic steel, Aluminium bronze & Hasteloy Liners. – EPDM, EPDM HT, Nitrile (NBR), CSM (Hypalon) & FPM (Viton)
InterApp Desponia Wafer D1 Butterfly Valve
Variants: Body style – D1 Wafer Size range – DN25-1600 Maximum working pressure – 16 bar / 20 bar (under request) Materials of Construction Body – Cast Iron & Ductile Iron Disc – Ductile Iron, Carbon Steel, 316 Stainless Steel, Super austenitic steel, Aluminium bronze & Hasteloy Liners. – EPDM, EPDM HT, Nitrile (NBR), CSM (Hypalon) & FPM (Viton)